Tag Archives: St. Paul Winter Carnival

Snow Devil 1012 team earns third place in Autonomous Snowplow Competition

The team, lead by faculty advisors E.J. Daigle and John McShannock, was made up of Automated Systems & Robotics students James Adams, Tim Easter, Jim Herman and Evan Prokop; Electronics & Engineering Technology students Andy Haug and Donald Kries; and Engineering Drafting & Design student Tony Laylon.

The team, lead by faculty advisors E.J. Daigle and John McShannock, was made up of Automated Systems & Robotics students James Adams, Tim Easter, Jim Herman and Evan Prokop; Electronics & Engineering Technology students Andy Haug and Donald Kries; and Engineering Drafting & Design student Tony Laylon.

The Snow Devil 1012 plow team earned third place and the Golden Smile Sportsmanship Award last weekend at the Fifth Annual Institute of Navigation (ION) Autonomous Snowplow Competition.  The event is part of the St. Paul Winter Carnival and took place in Rice Park.

The team, lead by faculty advisors E.J. Daigle and John McShannock, was made up of Automated Systems & Robotics students James Adams, Tim Easter, Jim Herman and Evan Prokop; Electronics & Engineering Technology students Andy Haug and Donald Kries; and Engineering Drafting & Design student Tony Laylon.

The Snow Devil 1012 used a magnetic navigation system to track a 0-3VDC electronic signal. Course correction calculations were done in an Allen Bradley MicroLogix PLC.

064

The University of Michigan-Dearborn’s Zenith and Yeti plows earned first and second place. Dunwoody’s Snow Devil 1012 earned third place, followed by the University of Calgary’s Fighting Mongooses, North Dakota State University’s Thundar, Case Western Reserve University’s Von Snowmower, University of Minnesota’s Ground Squirrel, and North Dakota State University’s Snowmenator.

Faculty Advisor and Dean of Robotics & Manufacturing E.J. Daigle said the Snow Devil 1012’s simplistic design and marketability set it apart from the competition.

“Most of the robots had over $10,000 in just sensors. Our total robot cost was $3,000 and could be implemented today by embedding magnetic sensors into a sidewalk or driveway,” he said.

For earning third place, the Snow Devil team won $2,000. Part of the prize money was used to build this year’s robot, some was used for a celebration dinner for the team and the rest will be used to kick start next year’s team.

The team also won the Golden Smile Sportsmanship Award and $500.  Daigle said the team did a lot to deserve the sportsmanship award. The Dunwoody Snow Devils: helped every team with tools, wire and parts to make repairs; cheered the loudest for every team as they competed; organized and participated in the parade with two other teams; initiated crowd participation through an audible checklist and 1-800-SNO-PLOW; and helped tear down the competition field after the event.

WCCO Channel 4 News’ Rachel Slavik interviewed Daigle for the story “Autonomous Snowplow Competition Wows Winter Carnival.”

ION Autonomous Snowplow Competition

According to the ION Autonomous Snowplow Competition website: “The purpose of this competition is to challenge university and college students, as well as the general public, to design, build, and operate a fully autonomous snowplow to remove snow from a designated path. The objectives of this competition include encouraging students and individuals to utilize the state of the art in navigation and control technologies to rapidly, accurately, and safely clear a path of snow.”

 

Students and Snow Devil 1012 compete in Autonomous Snowplow Competition this weekend

Seven students and their Snow Devil 1012 plow will compete in the Fifth Annual Institute of Navigation (ION) Autonomous Snowplow Competition in Rice Park this weekend.

Seven students and their Snow Devil 1012 plow will compete in the Fifth Annual Institute of Navigation (ION) Autonomous Snowplow Competition in Rice Park this weekend.

Seven students and their Snow Devil 1012 plow will compete in the Fifth Annual Institute of Navigation (ION) Autonomous Snowplow Competition in Rice Park this weekend.

The competition runs Jan. 24-25 from 9 a.m. to 2 p.m. in Rice Park, Downtown St. Paul, Minn.

The Snow Devil 1012 uses a magnetic navigation system to track a 0-3VDC signal. Course correction calculations are done in an Allen Bradley MicroLogix PLC.

The Snow Devil 1012 uses a magnetic navigation system to track a 0-3VDC signal. Course correction calculations are done in an Allen Bradley MicroLogix PLC.

According to the ION Autonomous Snowplow Competition website: ”The purpose of this competition is to challenge university and college students, as well as the general public, to design, build, and operate a fully autonomous snowplow to remove snow from a designated path. The objectives of this competition include encouraging students and individuals to utilize the state of the art in navigation and control technologies to rapidly, accurately, and safely clear a path of snow.”

The Snow Devil 1012 uses a magnetic navigation system to track a 0-3VDC signal. Course correction calculations are done in an Allen Bradley MicroLogix PLC.

Come out and see the latest autonomous navigation technologies from eight of the top engineering universities in the nation.

This is the fifth year Dunwoody has participated in the competition. Here is a preview of the team’s 2015 entry: 

For more information about the competition, visit www.autosnowplow.com.

Dunwoody’s “Snow Devils” team takes third place

The Snow Devils autonomous snow plow in action

The Snow Devils autonomous snow plow in action

Dunwoody College’s Autonomous Snow Plow Competition team the Snow Devils took third place at last weekend’s competition. The competition was sponsored by the Institute of Navigation and was part of the St. Paul Winter Carnival festivities.

Teams from Ohio University and Miami of Ohio University took first and second. Dunwoody came in third, beating out teams from University of Minnesota, University of Michigan and Wright State.

For the competition, the teams designed a robotic snow plow that had to remove snow from two fields. The first field was a straight line “I Field” which is meant to simulate a city sidewalk. The second field was a “U-Shape” which is far more challenging.

Congratulations to the Snow Devils: Michael Carnis (ASRO), James Jorgenson (MDES), Keith McClelland (ASRO), Joshua Moses (ASRO), Randy Taklo (ASRO) and Nigel Ystenes (ASRO). And many thanks to faculty members John McShannock, Tim Flugum and E.J. Daigle, who advised the team.

The Snow Devils and faculty advisors

The Snow Devils and faculty advisors

For more information check out:http://www.autosnowplow.com.

Manufacturing students build a robotic snow plow

What the team started with

What the team started with

A group of Robotics and Manufacturing students will be competing at this weekend’s St. Paul Winter Carnival in the Institute of Navigation’s Autonomous Snow Plow Competition. The competing schools include: University of Minnesota, University of Michigan, Dunwoody College of Technology, Ohio University, Wright State University and Miami University (of Ohio).

TThe competition will take place from 8 a.m. to noon, Saturday, Jan. 29, and from 9 a.m. to 1 p.m. Sunday, June 30, in downtown St. Paul in front of the public library. Dunwoody’s competition slot won’t be announced until 7:30 a.m. tomorrow morning. We will post video for those who can’t make it to the live competition.

In addition, the Dunwoody team and robotic plow will march in the Winter Carnival parade, which starts at 2 p.m.

Snow-Plow-Machining-Parts-2011

Machining parts for the plow

For the competition, schools must design a robotic snow plow that will remove snow from two fields. The first field is a straight line “I Field” which is meant to simulate a city sidewalk. The second field is a “U-Shape” which is far more challenging. The following students will be competing in this year’s challenge: Michael Carnis (ASRO), James Jorgenson (MDES), Keith McClelland (ASRO), Joshua Moses (ASRO), Randy Taklo (ASRO) and Nigel Ystenes (ASRO). Faculty member John McShannock, Tim Flugum and E.J. Daigle are advising the team.

For more information and to monitor the results check out: http://www.autosnowplow.com.